INJECTION MOLDING OF PLASTIC MATERIALS

During the plastic injection molding process, polymers are melted to be injected into the cavities of a mold to obtain a durable end product with good technical and aesthetic quality. Technical choices about the mold construction, thermoplastic materials and production process have a strong influence on the technical and aesthetic characteristics of the part and about molding cost effectiveness.

Molding process is strongly linked to the mold design and construction. Our specialists cooperate since the beginning about feasibility analysis, working with customer in order to identify the most suitable technologies and technical solutions. Consequently the quality parameters of each production are a result of an appropriate configuration of the mold and of the equipment and injection machineries used in EPS.

Last but not least, injection molding technology creates durable plastic products, a valid alternative to other materials such as those made of metal. Therefore the technology of thermoplastic materials while guaranteeing excellent results in mechanical and aesthetic performance, can even succesfully replace other production processes.

CO- DESIGN AND CHOICE OF THERMOPLASTIC POLYMERS

The plastic parts made in EPS are the result of a cooperation between plastic specialists used to work in team to offer consultancy in terms of industrialization of parts and technical and aesthetic performance achievable using different types of polymer.

On this basis our support to customer begins with the co-design of the mold and the industrialization of the detail and ends with the choice of the most suitable thermoplastic material for the expected result.Our method offers the needed consultancy for the maximun optimization of product quality and production process for molds built in EPS and for molds used just for molding.

Consequently we use for each industrial sector the right technologies for small and large production volumes.

Find out more

HIGH EFFICIENCY TECHNOPOLYMER MOLDING AND BIOPLASTIC

A fundamental part of the consultancy offered in EPS is about the choice of plastic materials from tradition to innovation, till bioplastic. The circular economy and environmental protection have driven us to use ecological and recyclable plastic materials for molding as well as to use, if and where it is possible, materials obtained from mechanical recycling.

Discover the Ecolab service

HIGH EFFICIENCY TECHNOPOLYMER MOLDING AND BIOPLASTIC

DO YOU HAVE AN IDEA OR A NEW PROJECT?

WRITE US

MOLDING, MAINTENANCE AND EXTRAORDINARY WORK ON MOLDS

Mold maintenance is scheduled regularly to keep their functioning optimal and if breakages happens extraordinary interventions are operated promptly to avoid interruptions in long productions. In EPS we cover the whole plastic material processing chain with an internal mold tooling and our own molding department. We use biomaterials, traditional polymers and innovative technopolymers. All the materials used can be filled with glass fibres, have mineral or mixed fillers. Materials can be radioactive with PTFE, be antiseptic, ant UV or V0.

Our two departments work in synergy, guaranteeing to customers maximum service and speed in supply. Our continuity let also fast interventions of modification in mold if needed.

PRESS MACHINES FROM 50 TONS TO 1300 TONS

4 PRESS MACHINES FOR BI-INJECTION (2k), FOR THE INJECTION OF TWO DIFFERENT MATERIALS

PRODUCTION OF PRE -SERIES AND CUSTOMIZED BATCHES

OVERINJECTION OF INSERTS

STABILIZATION OF PARTS IN A HUMIDISTATIC CABIN

BIOMATERIALS, TRADITIONAL POLYMERS AND INNOVATIVE TECHNOPOLYMERS UTILIZATION. ALL THE MATERIALS USED CAN BE FILLED WITH GLASS FIBRES, HAVE MINERALS OR MIXED FILLERS. THEY CAN BE ADDED WITH PTFE, BE ANTISTATIC, ANTI UV AND V0.

MOLDING OF FOOD CONTACT PLASTIC

The introduction of some precise management systems in EPS characterize the production of plastic products intended having contact with food . MOCA -food contact materials-are objects intended to come into contact with food as it happens in food equipment such as coffee machines or food processing machinery. MOCAs must be produced in accordance with EU regulations , including good manufacturing practices. We applie Food Contact processes rules to the entire production chain to guarantee a complete traceability and food compliance of produced parts.

QUALITY

Quality control of produced parts is performed using innovative technologies. Process control, tests and measurements certify the conformity of the parts to the technical specifications. All qualitative reports and production data of each order guarantee the traceability of batches from raw material to the finished product. Furthermore, thanks to the use of measuring instruments and specific software, the technical specifications and regulatory documentation requested by customers are managed.

FINISHING

We deal with and can offer a wide range of finishing with molding.

We support our customers in choosing the most suitable finishing, combining the used polymers, technical and quality checks in order to achieve the requested final result. The whole service is carried on with certifications and supply specifications.

INJECTION MOLDING OF PLASTIC MATERIALS

CO- DESIGN AND CHOICE OF THERMOPLASTIC POLYMERS

HIGH EFFICIENCY TECHNOPOLYMER MOLDING AND BIOPLASTIC

DO YOU HAVE AN IDEA OR A NEW PROJECT?

MOLDING, MAINTENANCE AND EXTRAORDINARY WORK ON MOLDS

PRESS MACHINES FROM 50 TONS TO 1300 TONS

4 PRESS MACHINES FOR BI-INJECTION (2k), FOR THE INJECTION OF TWO DIFFERENT MATERIALS

PRODUCTION OF PRE -SERIES AND CUSTOMIZED BATCHES

OVERINJECTION OF INSERTS

STABILIZATION OF PARTS IN A HUMIDISTATIC CABIN

BIOMATERIALS, TRADITIONAL POLYMERS AND INNOVATIVE TECHNOPOLYMERS UTILIZATION. ALL THE MATERIALS USED CAN BE FILLED WITH GLASS FIBRES, HAVE MINERALS OR MIXED FILLERS. THEY CAN BE ADDED WITH PTFE, BE ANTISTATIC, ANTI UV AND V0.

MOLDING OF FOOD CONTACT PLASTIC

QUALITY

FINISHING

Painting

Pad Printing

Silk -screen printing

Pre-spaced applications and labels

Films and packaging

Projects

Our services

DESIGN, CONSTRUCTION AND TESTING OF MOLDS

ASSEMBLY OF PLASTIC
COMPONENTS

Contact us

INJECTION MOLDING OF PLASTIC MATERIALS

CO- DESIGN AND CHOICE OF THERMOPLASTIC POLYMERS

HIGH EFFICIENCY TECHNOPOLYMER MOLDING AND BIOPLASTIC

DO YOU HAVE AN IDEA OR A NEW PROJECT?

MOLDING, MAINTENANCE AND EXTRAORDINARY WORK ON MOLDS

PRESS MACHINES FROM 50 TONS TO 1300 TONS

4 PRESS MACHINES FOR BI-INJECTION (2k), FOR THE INJECTION OF TWO DIFFERENT MATERIALS

PRODUCTION OF PRE -SERIES AND CUSTOMIZED BATCHES

OVERINJECTION OF INSERTS

STABILIZATION OF PARTS IN A HUMIDISTATIC CABIN

BIOMATERIALS, TRADITIONAL POLYMERS AND INNOVATIVE TECHNOPOLYMERS UTILIZATION. ALL THE MATERIALS USED CAN BE FILLED WITH GLASS FIBRES, HAVE MINERALS OR MIXED FILLERS. THEY CAN BE ADDED WITH PTFE, BE ANTISTATIC, ANTI UV AND V0.

MOLDING OF FOOD CONTACT PLASTIC

QUALITY

FINISHING

Painting

Pad Printing

Silk -screen printing

Pre-spaced applications and labels

Films and packaging

Projects

Our services

DESIGN, CONSTRUCTION AND TESTING OF MOLDS

ASSEMBLY OF PLASTIC COMPONENTS

Contact us

ASSEMBLY OF PLASTIC
COMPONENTS